Відео

Well I have to say your video is brilliant, I am making a Dalek and it is controlled by an old mobility scooter and to get it controlled by an RC unit had me baffled but watching your video has blown away all the tec cobwebs and helped me see it is possible love it thank you.

You need a stick vac.

Boi you my nigga for life! Preciate you makin a video killa. Im bouta buy da parts and build one myself

Cool 👌

What is your settings on your controller for turning right and left, I'm using same controller but sometimes doesn't wanna turn right

She felt uneasy about opening communication with spirits because deep down she knows it’s wrong. We’re not supposed to communicate with the dead and her instincts are warning her away from it. Listen to your gut instinct! Stay away from that contact. You feel that way for a reason.

Hi I attempted this, thank you, I got jazzy motors that work with 200 watts continuous and 1200 watts peak, the problem is the fuse keeps blowing as my duo 30 only takes 30Amps, so I put a 30 Amp inline fuse to protect it, it runs ok but when the motors draw more power, the fuse blows, I don't know what to do, how can I keep the motors from not pulling so much Amps? any ideas? Thank you

I saw your parts list but do you have an exact parts list? So we can get a motor driver that works with everything

Love it..... Going to build me one. Fantastic Video...... i know this is 4 years old but can you post yous new upgrade if you have done them. AA++

thank you very much! you given important information in so available format❤

That is so cool. I’m not wheelchair bound but I hurt my knee. The robot mowers they sell are several thousand dollars & this looks doable. I watched your how to video & it was really easy to understand. Nice to to see it in action 😁 so awesome. Thanks for sharing

You are a GOD!

You guys will have fun, enjoy. I've been camping all my life, and 99% of the time I go by myself. I have a small manual folding wheelchair , my car has a braunability chair topper and I have a wheelchair accessible van and a smart drive too, i sometimes take on road trips.

Молодец, руки растут из правильного места👍

Have you thought about 3d printing some of your custom parts? That might even work better.

oooh fella puntures what a nightmare these days,my current chair is no good peeeees me off badly,my 1st chair when i was 18 wasn't so bad fixed my 1st punture all by myself i had dropped an lsd tab at the time which i never took again after that night my legs shook spasmed the whole 12hour trip but i did fix the punture in that time fun that was.

hi from me in the uk.. u guys are awesome living my old dream,spent so much time of trying it out myself but not happened yet my best friend who i talked with all the time of doing all this died killed the dream but we have to keep positive keep going,hopefully oneday.didn't u all find something good from that time together good? i found some the times me and my old friend built a hide on a field we was allowed to shoot on.

Thank you for this video. I'm now in a wheelchair. I adore camping but have been trying to figure out how to do it

Wow man! This is absolutely sweet. Its elegant and seems reliable and easy to service. A lot of people build really complex systems that are over my head as a beginner but this is really cool and not over though. Really neat, thanks for making the video explaining everything

If I buy you an electric one will you build me one?

I was curious, do you have access to restroom facilities? How do you manage if you need to use the bathroom?”

connect a gopro and you can live view from the phone

Where do you get the little plug in connectors you use on the flysky receiver? Mine came only with the binding connector.

The hairspray worked so well! Thank you❤️

What the series no motor driver

I have used your video to build my remote lawn mower. The problem I have is that the motors are powerfull and when I start them I have to just slightly move the switch on the remote or the mower will bolt. Is there a way to step down the amount of power to the motors so even at full throttle they would only run at the 7 mph you have shown?

I'm actually homeless and disabled in my truck,great videos

Would like to buy 1 please write back

Oh my goodness! What a great teacher you are. I think i can do this. Many blessings to you. Thank you for sharing.

Patent this and sell them..

I actually repair roho's for pinholes and replace the cells itself. For a pinhole you scuffed the area, clean it with a pad of alcohol and then you put your patch on as flat as you can. Then you take a tablespoon and press it down all around on a hard surface to guarantee it to stick. Changing cells is a different topic. I do it all the time. You do need skills for that and some extra tools and I've made templates up to help me guide the new cells back into place without them being off center or whatever.

Is that toggle switch rated anywhere near 60 amps?

Attach it to the wheelchair and handle it sitting more fun

Great job !

Very cool!

You can also add a lever activated kill switch so that if it runs into something, it will turn the engine off.

👍👍👍

Thank you for this. I've been interested in going camping but wasn't sure how easy or difficult it would be in a wheelchair. This is definitely on my bucket list of things to do.

Noice

Nice job. You asked for some idea on improvement. The only thing I would change is the front wheels. I used the swivel wheels from the wheel chair. I made one a couple years ago to mow under the pine trees. The fixed wheels seem to make your mower go straighter though so if you dont have to go around to many obstacles it looks like they work good for you. I like the idea of the starter too. Nice work

I use a power wheelchair. I prefer the washable swiffer pads. The ones you use are too expensive for me. Thanks for sharing. I'm going to start a UA-cam channel as well and share my life in a power chair. Thanks again.

Do you know if it would work ok on steep hills?

Molim te treba mi pomoc, kako mogu otvoriti ser izbacuje mi eror2 zbog slabe baterije ali se ne otvara a u pitanju je dometic sef koji je jako slican tom tvom

Could not figure out why my R/C mower would gain a mind of its own and need to be shut down for a minute when I changed direction quickly/often until I watched your video. Just ordered a step down converter to stop the fly back voltage from messing with my receiver. Thank you for your great video and information. Wish me luck.

Thank you so much for sharing!! I have been looking into this for my daughter’s pediatric wheelchair. I was struggling to find someone using it for a wheelchair, so this was amazing to see! I appreciate knowing about the extra clamp too!

I copied most of your methods except I used EZ Mow wheels for the front casters. You are literally an inspiration I’ve been in a chair since early 2015. I want to mount a RC swiveling iPhone holder on it somehow so I can FaceTime it from my iPad so I can mow from anywhere and I wouldn’t ha ve to follow my mower around my yard. But I need your help.

Congratulations. Thanks for presenting this..

I have a lawn mower (two 350w motors) controlled by a sabertooth 2x25 and a flysky i6ab. All fonctionned. I had to change the wheel transmission, so I had to dismantel the electronics. Now, all remounted at the original position, when I turn on the circuit, one wheel start spinning alone. (turning on the flysky, it cannot drives. I am not a specialist). I succesfully rebinded, but the wheel start again. On the flysky display appear a third line: SIGS1:10. What does it mean? (i suggest somethings about velocity of motor 1). What can i do? Thanks

Much appreciated 👊🏾

Awesome video But how do you teach remote to turn motor when you move joystick?